BasiCut, EasyCut

BasiCut 275.230 DG BasiCut 275.230 DG is simple and universal manual bandsaw, which is used mainly in locksmith shops and smaller operations. Cast iron arm provide a better absorption of vibrations during cutting than the arm from a welded construction. The saw band is driven by a double-speed industrial motor and an oil-bath worm gearbox. Machine is equiped with the double-sided swivelling arm with angle positioning 45° to the left and 60° to the right (at a stable position of the clamped material) and a robust vice ensure a universal use of the saw. The material clamping is done very easily by using a vice, whose movable jaw is guided by trapezoidal screw. During serial cutting, the material can be effectively clamped by using a fast (eccentric) lever. Material feeding is carried out manually, by the arm of the operator. EasyCut 275.230 DG A gravity bandsaw with a robust cast-iron arm and 27 mm high saw band. Hardmetal band precision guide, an arm joint laid in preloaded tapered bearings, and synchronous running brush for chips removal providing the best and effecient productivity and keep the saw band in good condition for a long time. Band downfeed is ensured by the arm’s self-weight. Saw arm is after cutting lifted by the hand. The machine offers two-sided angle cuts. The saw band is driven by a double-speed industrial motor and an oil-bath worm gearbox. The double-sided swivelling arm with the 45°- 0/90°- 60° range (at a stable position of the clamped material) and a robust vice ensure a universal use of the saw.